Authors Index


 

 

A

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Abe, B.
 
A Spreadsheet Tool for the Analysis of Flows in Small-scale Water Piping Networks [Program→]
 

Abu-Mahfouz, A.
 
State estimation in water distribution network: A review [Program→]
 
Security in Software-Defined Wireless Sensor Networks: Threats, Challenges and Potential Solutions [Program→]
 

Abu-Mahfouz, A.
 
An Interface for Coupling Optimization Algorithms With EPANET in Discrete Event Simulation Platforms [Program→]
 
A Spreadsheet Tool for the Analysis of Flows in Small-scale Water Piping Networks [Program→]
 

Adedeji, K.
 
A Spreadsheet Tool for the Analysis of Flows in Small-scale Water Piping Networks [Program→]
 

Afanasev, M.
 
Performance evaluation of the message queue protocols to transfer binary JSON in a distributed CNC system [Program→]
 

Agostinho, C.
 
Legacy Systems Interactions with the Supply Chain Through the C2NET Cloud-based Platform [Program→]
 

Ahamd, B.
 
Ensuring the consistency between assembly process planning and machine control software [Program→]
 

Ahmad, M.
 
Ensuring the consistency between assembly process planning and machine control software [Program→]
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Ali Qureshi, K.
 
Legacy Systems Interactions with the Supply Chain Through the C2NET Cloud-based Platform [Program→]
 

Aliabadi, A.
 
SOC Estimation for a Lithium-Ion Battery by Designing a Nonlinear Observer Based on an Equivalent Circuit Model [Program→]
 

Almeida, L.
 
Nash equilibrium for Proactive Anti-jamming in IEEE 802.15.4e (Emerging wireless sensor actuator technologies for I4.0) [Program→]
 

Alyanbaawi, A.
 
Efficient Data Lookup in Non-DHT Based Low Diameter Structured P2P Network [Program→]
 
A Modified Version of DVR-Based Multicasting with Security [Program→]
 
An Efficient Approach for Load-Shared and Fault- Tolerant Multicore Shared Tree Multicasting [Program→]
 

Amin, H.
 
Hybrid Spiking Neural Model for Clustering Smart Environment Activities [Program→]
 

Amini, A.
 
Empirical Propagation Performance Evaluation of LoRa for Indoor Environment [Program→]
 

Amza, C.
 
Semantic-aware Anomaly Detection in Real Time Parking Data [Program→]
 

Andre, R.
 
Energy Efficiency Enhanced Shop Floor Scheduling - Data Model and Flexible Optimization Heuristics [Program→]
 

Angione, G.
 
Validation of PERFoRM reference architecture demonstrating an automatic robot reconfiguration application [Program→]
 

Anton, C.
 
Multi-Layered Data Mining Architecture in the Context of Internet of Things [Program→]
 

Araujo, R.
 
Online Evolving Fuzzy Control Design: An Application to a CSTR Plant [Program→]
 

Araújo, R.
 
Semi-supervised Soft Sensor and Feature Ranking Based on Co-Regularised Least Squares Regression Applied to a Polymerization Batch Process [Program→]
 

Arnst, A.
 
Method of automated design of operating the workpieces in a CAD system environment. [Program→]
 

Aslancı, E.
 
Detection of Regime Switching Points in Non-Stationary Sequences using Stochastic Learning based Weak Estimation Method [Program→]
 

Atzmueller, M.
 
Explanation-Aware Feature Selection using Symbolic Time Series Abstraction: Approaches and Experiences in a Petro-Chemical Production Context [Program→]
 

Augusto Rabelo Oliveira, R.
 
Energy Efficiency in Industry 4.0 using SDN [Program→]
 

Avdyukhin, D.
 
Plant trace generation for formal plant model inference: methods and case study [Program→]
 

Azam, M.
 
Analysis of River Bed Variation Based on Hydrological and Hydraulic Models [Program→]
 

Azkarate-askasua, M.
 
A Railway Safety and Security Concept for low-power mixed-criticality systems [Program→]
 

Azzolin, R.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

 

B

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Babazadeh, D.
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

Baltuano, O.
 
Energy Optimization of an Experimental Wireless Sensor Network for Remote Areas, Part I: Intra-Cluster Communications [Program→]
 

Banerjee, S.
 
Ontology Driven Query Language for NoSQL Databases [Program→]
 

Barata, J.
 
Summer School on Intelligent Agents in Automation: Experience and Reflections from the Second Edition [Program→]
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 
Orchestrating Loosely Coupled and Distributed Components for Product/Process Servitization [Program→]
 

Barbosa, J.
 
Agent-based Reconfiguration in a Micro-flow Production Cell [Program→]
 
Dynamic Monitoring of Key-Performance Indicators in Industrial Environments [Program→]
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Barzanji, A.
 
Automation, per se, is not Job Elimination: How Artificial Intelligence Forwards Cooperative Human-Machine Coexistence [Program→]
 

Battaglia, F.
 
Simulative assessments of the IEEE 802.15.4 CSMA/CA with Priority Channel Access in Structural Health Monitoring scenarios [Program→]
 

Baum, M.
 
Framework for Mining Event Correlations and Time Lags in Large Event Sequences [Program→]
 

Beck, F.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Becker, A.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Beckert, B.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 

Benjamin, K.
 
Explanation-Aware Feature Selection using Symbolic Time Series Abstraction: Approaches and Experiences in a Petro-Chemical Production Context [Program→]
 

Bergmann, L.
 
Developing Open Source Cyber-Physical Systems for Service-Oriented Architectures Using OPC UA [Program→]
 

Bernardi, A.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Bernshausen, J.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Bhattacharyya, A.
 
Semantic-aware Anomaly Detection in Real Time Parking Data [Program→]
 

Bianchino, S.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Bicaku, A.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Bilbao, A.
 
A Railway Safety and Security Concept for low-power mixed-criticality systems [Program→]
 

Bischke, B.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Bloch, H.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Block, D.
 
Wireless Interference Identification with Convolutional Neural Networks [Program→]
 

Bolea, Y.
 
Computerized Control Strategy to Prevent Wastewater Plants Pollution [Program→]
 

Bonci, A.
 
The Relational Model: in Search for Lean and Mean CPS technology [Program→]
 

Borisov, I.
 
Design of the High-Payload Grasping Device for Assistive Manipulation [Program→]
 
Development of the design and description of the control system of the hand rehabilitation device [Program→]
 

Borisov, O.
 
Design of the High-Payload Grasping Device for Assistive Manipulation [Program→]
 

Borsych, W.
 
Specification and Design of an Industrial Manufacturing Middleware [Program→]
 

Boschi, F.
 
A standard approach to production systems modelling based on Finite State Automata [Program→]
 

Botelho, S.
 
Guidelines for Using MARTE Profile Packages Considering Concerns of Real-Time Embedded Systems [Program→]
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Bouazza, K.
 
Hybrid Spiking Neural Model for Clustering Smart Environment Activities [Program→]
 

Bougouffa, S.
 
Scalable Cloud Based Semantic Code Analysis To Support Continuous Integration of Industrial PLC Code [Program→]
 

Brandenbourger, B.
 
Modeling and verifying behavioral constraints for automation systems [Program→]
 

Brandmeier, M.
 
Development of an ontology-based competence management system [Program→]
 

Brinkmann, M.
 
Testbed Architecture for Maritime Cyber Physical Systems [Program→]
 

Brito, G.
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 
Orchestrating Loosely Coupled and Distributed Components for Product/Process Servitization [Program→]
 

Broderius, N.
 
Introducing agent-based simulation of manufacturing systems to industrial discrete-event simulation tools [Program→]
 

Brossog, M.
 
Development of an ontology-based competence management system [Program→]
 

Bruzzone, A.
 
Lego-like reconfigurable machining system [Program→]
 

Brückner, D.
 
An Approach for Context Sensitive Product Extensions Services [Program→]
 

Buzdalov, M.
 
Automatic Generation of Function Block Applications Using Evolutionary Algorithms: Initial Explorations [Program→]
 

Büth, L.
 
Introducing agent-based simulation of manufacturing systems to industrial discrete-event simulation tools [Program→]
 

 

C

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Cachada, A.
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Cadavid Berns, M.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Calà, A.
 
A harmonized approach for constructing a robust and efficient technology backbone for agile manufacturing systems [Program→]
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Castellanos, E.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Cemernek, D.
 
Big Data as a Promoter of Industry 4.0: Lessons of the Semiconductor Industry [Program→]
 

Cenedese, C.
 
Multi-Layered Data Mining Architecture in the Context of Internet of Things [Program→]
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 

Cha, S.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 

Chacón Vásquez, M.
 
New Predictive PID Controllers for packet dropouts in Wireless Networked Control Systems [Program→]
 

Chaisuriyakul, K.
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Chakraborty, A.
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 

Chakravorti, N.
 
Validation of PERFoRM reference architecture demonstrating an automatic robot reconfiguration application [Program→]
 

Chan, R.
 
Energy Optimization of an Experimental Wireless Sensor Network for Remote Areas, Part I: Intra-Cluster Communications [Program→]
 

Chang, A.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Chatterjee, S.
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Chaturvedi, A.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Chen, A.
 
A Framework for Designing Dynamic and Interoperable Automation and Robotics Systems [Program→]
 

Chen, E.
 
Development of a Mobile Application for the C2NET Supply Chain Cloud-based Platform [Program→]
 

Chen, G.
 
An Exponential Triangle Model for the Facebook Network Based on Big Data [Program→]
 

Cheng, H.
 
Ontology-Based Web Service Integration for Flexible Manufacturing Systems [Program→]
 

Chivilikhin, D.
 
CSP-based inference of function block finite-state models from execution traces [Program→]
 

Chivilikhin, D.
 
Plant trace generation for formal plant model inference: methods and case study [Program→]
 

Cho, S.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Chow, T.
 
An Exponential Triangle Model for the Facebook Network Based on Big Data [Program→]
 
Incorporating Word Embeddings in the Hierarchical Dirichlet Process for Query-Oriented Text Summarization [Program→]
 

Christensen, J.
 
Service-Oriented Data Acquisition and Management for Industrial Cyber-Physical Systems [Program→]
 

Chu, D.
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Cipcigan, L.
 
Low Carbon Technologies Integration in Smart Low Voltage Network [Program→]
 
Localised Energy Systems in Nigeria Power Network [Program→]
 

Colby, J.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Colombo, A.
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Colombo, A.
 
Benchmarking of existing OPC UA implementations for Industrie 4.0-compliant digitalization solutions [Program→]
 
A real-world application scenario for a novel collaborative ICT engineering platform [Program→]
 

Colombo, A.
 
Specification and Design of an Industrial Manufacturing Middleware [Program→]
 

Correia, A.
 
Context Sensitive Collaborative Product Service System Development Environment [Program→]
 

Costa, A.
 
Reconfigurable devices based experimentation supporting teaching introductory digital systems [Program→]
 

Coşkun, K.
 
Detection of Regime Switching Points in Non-Stationary Sequences using Stochastic Learning based Weak Estimation Method [Program→]
 

Crainicu, B.
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Cruz Salazar, L.
 
Classification of Agent-based Approaches to Apply Cyber Physical Systems in Manufacturing [Program→]
 

Csaplar, F.
 
An Application of Reinforcement Learning Algorithms to Industrial Multi-Robot Stations for cooperative handling operation [Program→]
 

Cucchiarelli, A.
 
The Relational Model: in Search for Lean and Mean CPS technology [Program→]
 

Curtis, K.
 
Empirical Propagation Performance Evaluation of LoRa for Indoor Environment [Program→]
 

 

D

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

D'Addona, D.
 
Lego-like reconfigurable machining system [Program→]
 

Dai, W.
 
Service-Oriented Data Acquisition and Management for Industrial Cyber-Physical Systems [Program→]
 

Danny, P.
 
An AutomationML Model for Plug-and-Produce Assembly Systems [Program→]
 

Das, S.
 
Adaptive Quadratic Interpolation for Loss Minimization of Direct Torque Controlled Induction Motor Driven Electric Vehicle [Program→]
 

Deabes, W.
 
Hybrid Spiking Neural Model for Clustering Smart Environment Activities [Program→]
 

Debnath, N.
 
Ontology Driven Query Language for NoSQL Databases [Program→]
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Delsing, J.
 
Protocol interoperability of OPC UA in Service Oriented Architectures [Program→]
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Dengel, A.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Dentler, J.
 
Cooperative Localization of Unmanned Aerial Vehicles in ROS - The Atlas Node [Program→]
 

Derhamy, H.
 
Protocol interoperability of OPC UA in Service Oriented Architectures [Program→]
 

Deshmukh, A.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Dey, N.
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Dias, J.
 
Agent-based Reconfiguration in a Micro-flow Production Cell [Program→]
 

Diehm, S.
 
Scalable Cloud Based Semantic Code Analysis To Support Continuous Integration of Industrial PLC Code [Program→]
 

Dimanidou, E.
 
Validation of PERFoRM reference architecture demonstrating an automatic robot reconfiguration application [Program→]
 

Ding, S.
 
Self-optimization of energy consumption in complex bulk good processes using reinforcement learning [Program→]
 
An Application of Reinforcement Learning Algorithms to Industrial Multi-Robot Stations for cooperative handling operation [Program→]
 

Dinç, B.
 
Unsupervised Mode Detection in Cyber-Physical Systems using Variable Order Markov Models [Program→]
 

Dionisio Rocha, A.
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 

Dragoni, A.
 
The Relational Model: in Search for Lean and Mean CPS technology [Program→]
 

Drews-Jr, P.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Duka, A.
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Dwi Atmojo, U.
 
A Framework for Designing Dynamic and Interoperable Automation and Robotics Systems [Program→]
 

de Sousa, M.
 
Nash equilibrium for Proactive Anti-jamming in IEEE 802.15.4e (Emerging wireless sensor actuator technologies for I4.0) [Program→]
 

di Orio, G.
 
Orchestrating Loosely Coupled and Distributed Components for Product/Process Servitization [Program→]
 

dos Santos Roque, A.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

 

E

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ebrahimi, M.
 
A Reliable Weighted Feature Selection for Auto Medical Diagnosis [Program→]
 

Eksen, F.
 
Unsupervised Mode Detection in Cyber-Physical Systems using Variable Order Markov Models [Program→]
 

Elbel, A.
 
System reconfiguration of modular production units using a SOA-based control structure [Program→]
 

Eliasson, J.
 
Protocol interoperability of OPC UA in Service Oriented Architectures [Program→]
 

Estévez, E.
 
A novel approach for Flexible Automation Production Systems [Program→]
 

Evald, P.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

 

F

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Fan, J.
 
AutoEncoder based High-dimensional Data Fault Detection System [Program→]
 
Multi-Label Classification for images with Missing Labels [Program→]
 

Faria, M.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Fasina, E.
 
Low Carbon Technologies Integration in Smart Low Voltage Network [Program→]
 
Localised Energy Systems in Nigeria Power Network [Program→]
 

Fay, A.
 
Model-based Engineering of CPPS in the process industries [Program→]
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 
Interoperability rules for heterogenous Multi-Agent Systems Levels of conceptual interoperability model applied for multi-agent systems [Program→]
 

Fedosov, Y.
 
Performance evaluation of the message queue protocols to transfer binary JSON in a distributed CNC system [Program→]
 

Ferreira, P.
 
An AutomationML Model for Plug-and-Produce Assembly Systems [Program→]
 

Ferreira, V.
 
Semi-supervised Soft Sensor and Feature Ranking Based on Co-Regularised Least Squares Regression Applied to a Polymerization Batch Process [Program→]
 

Ferry, N.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Filho, N.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Fischer, J.
 
Integrating Material Flow Simulation Tools in a Service-oriented Industrial Context [Program→]
 

Fischer, J.
 
Improvement of Maintenance through Speech Interaction in Cyber-Physical Production Systems [Program→]
 

Fischer, L.
 
Co-Simulation Techniques in Assistance Systems for Process Control [Program→]
 

Folmer, J.
 
Metrics for the Evaluation of Data Quality of Signal Data in Industrial Processes [Program→]
 

Fottner, J.
 
Deploying Microservices for a Cloud-based Design of System-of-Systems in Intralogistics [Program→]
 

Franke, J.
 
Development of an ontology-based competence management system [Program→]
 
Multifunctional Use of Functional Mock-up Units for Application in Production Engineering [Program→]
 

Freire, J.
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 

Freitas, E.
 
Modeling faults in communication protocols based on an aspect-oriented method [Program→]
 

Friedrich, W.
 
New Control Functions for IEC 61850 [Program→]
 

Fullen, M.
 
Defining and Validating Similarity Measures for Industrial Alarm Flood Analysis [Program→]
 

 

G

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Gaertner, N.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Ganesan, R.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Gao, Z.
 
Robust Fault Tolerant Control for Drive Train in Wind Turbine Systems with Stochastic Perturbations [Program→]
 
An Automatic Fuzzy Clustering Segmentation Algorithm with Aid of Set Partitioning [Program→]
 
Reinforcement-Learning Based Fault-Tolerant Control [Program→]
 

Garcia, C.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Garcia, J.
 
A MDE-based framework to improve the process management: The EMPOWER project [Program→]
 

Garcia, M.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Garcia-Vilchez, E.
 
An Approach to Renewable Energies Course for Energy Engineering Students in the Framework of the European Higher Education Area (EHEA) [Program→]
 

Garrity, J.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Genge, B.
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Gepp, M.
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Gholizadeh, M.
 
SOC Estimation for a Lithium-Ion Battery by Designing a Nonlinear Observer Based on an Equivalent Circuit Model [Program→]
 

Giovanelli, C.
 
Towards a Task Allocation Algorithm for Frequency Containment Reserves [Program→]
 

Gnege, B.
 
Optimally Scheduled Interventions in the Presence of Vulnerabilities for Modern Cyber-Physical Systems [Program→]
 

Godoy, B.
 
Model-based Control Design for a District Heating Plant [Program→]
 

Gomes, L.
 
Reconfigurable devices based experimentation supporting teaching introductory digital systems [Program→]
 

Gonzalez, N.
 
A Railway Safety and Security Concept for low-power mixed-criticality systems [Program→]
 

Gonçalves, G.
 
Universal Parser for Wireless Sensor Networks in Industrial Cyber Physical Production Systems [Program→]
 

Gosewehr, F.
 
Validation of PERFoRM reference architecture demonstrating an automatic robot reconfiguration application [Program→]
 
Specification and Design of an Industrial Manufacturing Middleware [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Goto, T.
 
Ontology Driven Query Language for NoSQL Databases [Program→]
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Graf-Brill, A.
 
Modelling and Certification for Electric Mobility [Program→]
 

Grau, A.
 
Computerized Control Strategy to Prevent Wastewater Plants Pollution [Program→]
 

Graube, M.
 
A roundtrip engineering approach for data consistency in process industry environments [Program→]
 

Graur, F.
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Grossmann, B.
 
Fast View-based Pose Estimation of Industrial Objects in Point Clouds using a Particle Filter with an ICP-based Motion Model [Program→]
 
Continuous hand-eye calibration using 3D points [Program→]
 

Gu, F.
 
FamilyPal: An Effective System for Detecting Family Activities Based on Smartphones [Program→]
 

Gu, Y.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Guedes, M.
 
An AutomationML Model for Plug-and-Produce Assembly Systems [Program→]
 

Gupta, B.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Gupta, B.
 
Efficient Data Lookup in Non-DHT Based Low Diameter Structured P2P Network [Program→]
 
A Modified Version of DVR-Based Multicasting with Security [Program→]
 
An Efficient Approach for Load-Shared and Fault- Tolerant Multicore Shared Tree Multicasting [Program→]
 

Gursch, H.
 
Big Data as a Promoter of Industry 4.0: Lessons of the Semiconductor Industry [Program→]
 

Götting, M.
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

 

H

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Haas, S.
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Habl, A.
 
Deploying Microservices for a Cloud-based Design of System-of-Systems in Intralogistics [Program→]
 

Hahn, A.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Hahn, A.
 
Simulative Evaluation of Applying Optimized Support Vector Machines to Identify the Simplified Ship Dynamic Model [Program→]
 
Testbed Architecture for Maritime Cyber Physical Systems [Program→]
 

Haller, A.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Haller, P.
 
Optimally Scheduled Interventions in the Presence of Vulnerabilities for Modern Cyber-Physical Systems [Program→]
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Hamam, Y.
 
An Interface for Coupling Optimization Algorithms With EPANET in Discrete Event Simulation Platforms [Program→]
 
A Spreadsheet Tool for the Analysis of Flows in Small-scale Water Piping Networks [Program→]
 
State estimation in water distribution network: A review [Program→]
 

Hamid, O.
 
Automation, per se, is not Job Elimination: How Artificial Intelligence Forwards Cooperative Human-Machine Coexistence [Program→]
 

Hancke, G.
 
Security in Software-Defined Wireless Sensor Networks: Threats, Challenges and Potential Solutions [Program→]
 

Hancke, G.
 
An ultrasonic-based localization system for underground mines [Program→]
 

Harrison, R.
 
Ensuring the consistency between assembly process planning and machine control software [Program→]
 

Harrison, R.
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Harrou, F.
 
Adaboost-based algorithm for human action recognition [Program→]
 

Hartmanns, A.
 
Modelling and Certification for Electric Mobility [Program→]
 

Haskamp, H.
 
Benchmarking of existing OPC UA implementations for Industrie 4.0-compliant digitalization solutions [Program→]
 

Haubeck, C.
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 

Hauf, D.
 
Multifunctional Use of Functional Mock-up Units for Application in Production Engineering [Program→]
 

Hayat, N.
 
Explanation-Aware Feature Selection using Symbolic Time Series Abstraction: Approaches and Experiences in a Petro-Chemical Production Context [Program→]
 

He, Z.
 
FamilyPal: An Effective System for Detecting Family Activities Based on Smartphones [Program→]
 

Heikkinen, E.
 
Complexity Based Test Cases for Log File Analyzers [Program→]
 

Heistracher, T.
 
OPC UA Integration for Field Devices [Program→]
 

Hellingrath, B.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

Henkel, C.
 
A harmonized approach for constructing a robust and efficient technology backbone for agile manufacturing systems [Program→]
 

Hensel, S.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Hermanns, H.
 
Modelling and Certification for Electric Mobility [Program→]
 

Herrmann, C.
 
Introducing agent-based simulation of manufacturing systems to industrial discrete-event simulation tools [Program→]
 

Hildenbrand, P.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 

Hoang, V.
 
An Improved Method for 3D Shape Estimation Using Cascade of Neural Networks [Program→]
 

Hoang, V.
 
An Improved Method for 3D Shape Estimation Using Cascade of Neural Networks [Program→]
 

Hoda, R.
 
ECoS: Energy Control System for Smart Homes [Program→]
 

Hoefig, K.
 
ArChes - Automatic Generation of Component Fault Trees from Continuous Function Charts [Program→]
 

Hoernicke, M.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Homay, A.
 
Nash equilibrium for Proactive Anti-jamming in IEEE 802.15.4e (Emerging wireless sensor actuator technologies for I4.0) [Program→]
 

Hosseinzadeh, S.
 
Empirical Propagation Performance Evaluation of LoRa for Indoor Environment [Program→]
 

Houacine, A.
 
Adaboost-based algorithm for human action recognition [Program→]
 

Huber, M.
 
Framework for Mining Event Correlations and Time Lags in Large Event Sequences [Program→]
 

Huber, S.
 
Towards a Methodology for Assisted Knowledge Discovery in Manufacturing [Program→]
 

Hwang, J.
 
Analysis of River Bed Variation Based on Hydrological and Hydraulic Models [Program→]
 

Hämäläinen, T.
 
Complexity Based Test Cases for Log File Analyzers [Program→]
 

 

I

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ihlenfeldt, S.
 
Towards a Methodology for Assisted Knowledge Discovery in Manufacturing [Program→]
 

Ilheu, P.
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 

Ishibashi, Y.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Iyenghar, P.
 
Early Model-Driven Timing Validation of IoT-Compliant Use Cases [Program→]
 

 

J

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Jacobsen, D.
 
Cloud architecture for industrial image processing [Program→]
 

Jasińśka-Biliczak, A.
 
Business Competencies and Innovation Capability in Cross-border Small Regional Enterprises [Program→]
 

Jin, X.
 
FamilyPal: An Effective System for Detecting Family Activities Based on Smartphones [Program→]
 

Jing, F.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Jo, K.
 
An Improved Method for 3D Shape Estimation Using Cascade of Neural Networks [Program→]
 
Automatic Person Information Extraction Using Overlay Text in Television News Interview Videos [Program→]
 

Jordaan, J.
 
An ultrasonic-based localization system for underground mines [Program→]
 

 

K

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Kalawsky, R.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Kalweit, P.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Kang, D.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Kannan, S.
 
Cooperative Localization of Unmanned Aerial Vehicles in ROS - The Atlas Node [Program→]
 

Karhela, T.
 
A framework for runtime verification of industrial process control systems [Program→]
 

Karnouskos, S.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Katai, Z.
 
Optimally Scheduled Interventions in the Presence of Vulnerabilities for Modern Cyber-Physical Systems [Program→]
 

Katebi, R.
 
New Predictive PID Controllers for packet dropouts in Wireless Networked Control Systems [Program→]
 

Kaymakci, C.
 
Energy Efficiency Enhanced Shop Floor Scheduling - Data Model and Flexible Optimization Heuristics [Program→]
 

Kempe, T.
 
Self-optimization of energy consumption in complex bulk good processes using reinforcement learning [Program→]
 

Kenley, C.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Kern, R.
 
Big Data as a Promoter of Industry 4.0: Lessons of the Semiconductor Industry [Program→]
 

Kiermeier, M.
 
Building Scalable Models for Anomaly Detection in Self-Organizing Industrial Systems [Program→]
 
Monitoring Self-Organizing Industrial Systems Using Sub-Trajectory Dictionaries [Program→]
 

Kilkki, O.
 
Towards a Task Allocation Algorithm for Frequency Containment Reserves [Program→]
 

Kim, B.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Kipouridis, O.
 
Deploying Microservices for a Cloud-based Design of System-of-Systems in Intralogistics [Program→]
 

Kirchen, I.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 
Metrics for the Evaluation of Data Quality of Signal Data in Industrial Processes [Program→]
 

Kirsten, M.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 

Kolyubin, S.
 
Design of the High-Payload Grasping Device for Assistive Manipulation [Program→]
 

Koneru, S.
 
A Modified Version of DVR-Based Multicasting with Security [Program→]
 

Korneev, G.
 
Plant trace generation for formal plant model inference: methods and case study [Program→]
 

Korodi, A.
 
Achieving Interoperability Using Low-Cost Middleware OPC UA Wrapping Structure. Case Study in the Water Industry [Program→]
 

Kowal, J.
 
Business Competencies and Innovation Capability in Cross-border Small Regional Enterprises [Program→]
 

Kremer, P.
 
Cooperative Localization of Unmanned Aerial Vehicles in ROS - The Atlas Node [Program→]
 

Krivosheev, S.
 
Development of the design and description of the control system of the hand rehabilitation device [Program→]
 

Krueger, V.
 
Fast View-based Pose Estimation of Industrial Objects in Point Clouds using a Particle Filter with an ICP-based Motion Model [Program→]
 
Continuous hand-eye calibration using 3D points [Program→]
 

Kruger, C.
 
An ultrasonic-based localization system for underground mines [Program→]
 

Krylova, A.
 
Performance evaluation of the message queue protocols to transfer binary JSON in a distributed CNC system [Program→]
 

Krüger, C.
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

Kuhamanee, T.
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Kulikov, D.
 
Method of automated design of operating the workpieces in a CAD system environment. [Program→]
 

Kumm, T.
 
New Control Functions for IEC 61850 [Program→]
 

Kuntze, D.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Kühn, E.
 
Discussion: No S Without Q [Program→]
 

 

L

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ladiges, J.
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 

Lai, L.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Lamersdorf, W.
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 

Langfinger, M.
 
A tiered security analysis of Industrial Control System Devices [Program→]
 
Addressing security challenges in industrial augmented reality systems [Program→]
 

Larijani, H.
 
Empirical Propagation Performance Evaluation of LoRa for Indoor Environment [Program→]
 

Lau, L.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Leal, A.
 
Safe Dynamic Reconfiguration Through Supervisory Control in IEC 61499 Compliant Systems [Program→]
 

Lechner, M.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 

Lee, B.
 
Integrating Material Flow Simulation Tools in a Service-oriented Industrial Context [Program→]
 

Lee, S.
 
Automatic Person Information Extraction Using Overlay Text in Television News Interview Videos [Program→]
 

Lehnhoff, S.
 
Co-Simulation Techniques in Assistance Systems for Process Control [Program→]
 

Leitao, P.
 
Summer School on Intelligent Agents in Automation: Experience and Reflections from the Second Edition [Program→]
 

Leitão, P.
 
Agent-based Reconfiguration in a Micro-flow Production Cell [Program→]
 
Dynamic Monitoring of Key-Performance Indicators in Industrial Environments [Program→]
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Lemme, G.
 
Towards a Methodology for Assisted Knowledge Discovery in Manufacturing [Program→]
 

Leonardi, L.
 
Simulative assessments of the IEEE 802.15.4 CSMA/CA with Priority Channel Access in Structural Health Monitoring scenarios [Program→]
 

Letting, L.
 
An Interface for Coupling Optimization Algorithms With EPANET in Discrete Event Simulation Platforms [Program→]
 

Li, F.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Li, H.
 
Evaluation of State of the Art Segmentation Methods for Muscle Cells [Program→]
 

Li, Y.
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Li, Y.
 
Robust Fault Tolerant Control for Drive Train in Wind Turbine Systems with Stochastic Perturbations [Program→]
 
An Automatic Fuzzy Clustering Segmentation Algorithm with Aid of Set Partitioning [Program→]
 

Liao, C.
 
Robotic Conveyor Tracking with Dynamic Object Fetching for Industrial Automation [Program→]
 

Lima-Monteiro, P.
 
ProSEco as a Data Processing Platform A Service-Oriented Architecture for Data Analysis [Program→]
 

Lin, Z.
 
Reinforcement-Learning Based Fault-Tolerant Control [Program→]
 

Lins, T.
 
Energy Efficiency in Industry 4.0 using SDN [Program→]
 

Liu, M.
 
An Autopilot System Based on ROS Distributed Architecture and Deep Learning [Program→]
 

Liu, Q.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Liu, X.
 
Robust Fault Tolerant Control for Drive Train in Wind Turbine Systems with Stochastic Perturbations [Program→]
 
An Automatic Fuzzy Clustering Segmentation Algorithm with Aid of Set Partitioning [Program→]
 

Liu, Z.
 
A Modified Version of DVR-Based Multicasting with Security [Program→]
 

Lo Bello, L.
 
Simulative assessments of the IEEE 802.15.4 CSMA/CA with Priority Channel Access in Structural Health Monitoring scenarios [Program→]
 

Loch, F.
 
A Virtual Training System for Aging Employees in Machine Operation [Program→]
 

Lohse, N.
 
An AutomationML Model for Plug-and-Produce Assembly Systems [Program→]
 

Longhi, S.
 
The Relational Model: in Search for Lean and Mean CPS technology [Program→]
 

Lopes, V.
 
Algorithm and Tool for LD to SFC Conversion With State-space Method [Program→]
 

Luo, R.
 
Robotic Conveyor Tracking with Dynamic Object Fetching for Industrial Automation [Program→]
 

Luvisotto, M.
 
Real-Time Wireless Extensions of Industrial Ethernet Networks [Program→]
 

Lv, Q.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Lüder, A.
 
Metric based modelling of flexibility properties of demonstration plants [Program→]
 
Recovery Planning Method as End-of-Life Support for Production Systems [Program→]
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

 

M

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ma, J.
 
Multi-Label Classification for images with Missing Labels [Program→]
 

Maciag, R.
 
Cyber physical systems by humanistic management. Introduction [Program→]
 

Maeng, S.
 
Analysis of River Bed Variation Based on Hydrological and Hydraulic Models [Program→]
 

Maier, A.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Majd, A.
 
A Reliable Weighted Feature Selection for Auto Medical Diagnosis [Program→]
 

Maksuti, S.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Maló, P.
 
Reconfigurable devices based experimentation supporting teaching introductory digital systems [Program→]
 

Manohar, M.
 
Adaptive Quadratic Interpolation for Loss Minimization of Direct Torque Controlled Induction Motor Driven Electric Vehicle [Program→]
 

Mantas, G.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 

Marcos, M.
 
A novel approach for Flexible Automation Production Systems [Program→]
 

Marcos, M.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Markham, J.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Marmaras, C.
 
Low Carbon Technologies Integration in Smart Low Voltage Network [Program→]
 

Martinez, H.
 
Computerized Control Strategy to Prevent Wastewater Plants Pollution [Program→]
 

Martinez Lastra, J.
 
Ensuring the consistency between assembly process planning and machine control software [Program→]
 
Legacy Systems Interactions with the Supply Chain Through the C2NET Cloud-based Platform [Program→]
 
Development of a Mobile Application for the C2NET Supply Chain Cloud-based Platform [Program→]
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Martinez-Garcia, H.
 
An Approach to Renewable Energies Course for Energy Engineering Students in the Framework of the European Higher Education Area (EHEA) [Program→]
 
The Use of Output-Capacitorless Class-AB CMOS Low-Dropout Regulator for Power Management [Program→]
 
Efficient LDO-Assisted DC/DC Buck Converter for Power Management Integrated Systems [Program→]
 

Masurkewitz-Möller, J.
 
New Control Functions for IEC 61850 [Program→]
 

Matei, O.
 
Multi-Layered Data Mining Architecture in the Context of Internet of Things [Program→]
 

Matischek, R.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 

Mehdi, G.
 
Ontology-Based Integration of Performance Related Data and Models: An Application to Industrial Turbine Analytics [Program→]
 

Meier, U.
 
Wireless Interference Identification with Convolutional Neural Networks [Program→]
 

Mendes, J.
 
Online Evolving Fuzzy Control Design: An Application to a CSTR Plant [Program→]
 

Merklein, M.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 

Messinger, A.
 
Discussion: No S Without Q [Program→]
 

Meyer, M.
 
Benchmarking of existing OPC UA implementations for Industrie 4.0-compliant digitalization solutions [Program→]
 

Meyer, O.
 
A harmonized approach for constructing a robust and efficient technology backbone for agile manufacturing systems [Program→]
 

Miettinen, T.
 
A framework for runtime verification of industrial process control systems [Program→]
 

Mironovich, V.
 
Automatic Generation of Function Block Applications Using Evolutionary Algorithms: Initial Explorations [Program→]
 

Miura, T.
 
Novel Infrastructure with Common API using Docker for Scaling the Degree of Platforms for Smart Community Services [Program→]
 

Moghaddam, M.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Mohammed, W.
 
Legacy Systems Interactions with the Supply Chain Through the C2NET Cloud-based Platform [Program→]
 
Development of a Mobile Application for the C2NET Supply Chain Cloud-based Platform [Program→]
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Montero, J.
 
A Railway Safety and Security Concept for low-power mixed-criticality systems [Program→]
 

Moutinho, F.
 
Reconfigurable devices based experimentation supporting teaching introductory digital systems [Program→]
 

Murshed, A.
 
Scheduler for Reliable Distributed Systems with Time-Triggered Networks [Program→]
 

Murugesan, L.
 
ECoS: Energy Control System for Smart Homes [Program→]
 

Mäkiö, J.
 
Business Competencies and Innovation Capability in Cross-border Small Regional Enterprises [Program→]
 

Mäkiö-Marusik, E.
 
Current Trends in Teaching Cyber Physical Systems Engineering [Program→]
 

Mór, J.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Möllmann, R.
 
Benchmarking of existing OPC UA implementations for Industrie 4.0-compliant digitalization solutions [Program→]
 

Müller, M.
 
Developing Open Source Cyber-Physical Systems for Service-Oriented Architectures Using OPC UA [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

 

N

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Nagorny, K.
 
An Approach for Context Sensitive Product Extensions Services [Program→]
 
A real-world application scenario for a novel collaborative ICT engineering platform [Program→]
 

Nefedov, E.
 
Towards Electric Vehicles Integration to Distributed Energy Resources of Prosumer [Program→]
 

Neto, L.
 
Universal Parser for Wireless Sensor Networks in Industrial Cyber Physical Production Systems [Program→]
 

Neubert, C.
 
Development of an ontology-based competence management system [Program→]
 

Nie, Q.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Niggemann, O.
 
Towards Industrie 4.0 Compliant Configuration of Condition Monitoring Services [Program→]
 
Defining and Validating Similarity Measures for Industrial Alarm Flood Analysis [Program→]
 

Niggemann, O.
 
A New Approach to Model-Based Test Case Generation for Industrial Automation Systems [Program→]
 

Nishi, H.
 
Novel Infrastructure with Common API using Docker for Scaling the Degree of Platforms for Smart Community Services [Program→]
 

Niu, J.
 
An Autopilot System Based on ROS Distributed Architecture and Deep Learning [Program→]
 
FamilyPal: An Effective System for Detecting Family Activities Based on Smartphones [Program→]
 

Noyer, A.
 
Early Model-Driven Timing Validation of IoT-Compliant Use Cases [Program→]
 

Nuschke, M.
 
Development of a Microgrid Controller for Black Start Procedure and Islanding Operation [Program→]
 

 

O

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Obermaisser, R.
 
Scheduler for Reliable Distributed Systems with Time-Triggered Networks [Program→]
 
Class-based Query-Optimization for Minimizing Worst-Case Execution Times of Diagnostic Queries in Embedded Real-Time Systems [Program→]
 

Obst, B.
 
Integrating Material Flow Simulation Tools in a Service-oriented Industrial Context [Program→]
 

Olaiya Afolaranmi, S.
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Oleynik, R.
 
Development of the design and description of the control system of the hand rehabilitation device [Program→]
 

Oliyide, R.
 
Low Carbon Technologies Integration in Smart Low Voltage Network [Program→]
 
Localised Energy Systems in Nigeria Power Network [Program→]
 

Orive, D.
 
A novel approach for Flexible Automation Production Systems [Program→]
 

Orlik, P.
 
Online Data-Driven Battery Voltage Prediction [Program→]
 

Orth, F.
 
Benchmarking of existing OPC UA implementations for Industrie 4.0-compliant digitalization solutions [Program→]
 

Ortmayer, M.
 
OPC UA Integration for Field Devices [Program→]
 

Ott, P.
 
Cloud architecture for industrial image processing [Program→]
 

 

P

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Pagani, A.
 
Dynamic Monitoring of Key-Performance Indicators in Industrial Environments [Program→]
 

Pajovic, M.
 
Online Data-Driven Battery Voltage Prediction [Program→]
 

Pal, A.
 
Adaptive Quadratic Interpolation for Loss Minimization of Direct Torque Controlled Induction Motor Driven Electric Vehicle [Program→]
 

Palkovits-Rauter, S.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Panoiu, C.
 
Real Time System for Measuring the Pantograph Vertically Movement [Program→]
 

Pantfoerder, D.
 
Improvement of Maintenance through Speech Interaction in Cyber-Physical Production Systems [Program→]
 

Park, H.
 
A Framework for Designing Dynamic and Interoperable Automation and Robotics Systems [Program→]
 

Patti, G.
 
Simulative assessments of the IEEE 802.15.4 CSMA/CA with Priority Channel Access in Structural Health Monitoring scenarios [Program→]
 

Pechmann, A.
 
Concept for Introducing the Vision of Industry 4.0 in a Simulation Game for Non-IT Students [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Pereira, A.
 
Dynamic Monitoring of Key-Performance Indicators in Industrial Environments [Program→]
 

Pereira, C.
 
Modeling faults in communication protocols based on an aspect-oriented method [Program→]
 
Ontology-driven IoT code generation for FIWARE [Program→]
 
Guidelines for Using MARTE Profile Packages Considering Concerns of Real-Time Embedded Systems [Program→]
 

Perera, H.
 
Placing Reflectors for Reducing Payback Period of Solar PV for Smart Buildings [Program→]
 

Perez, F.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Perez, M.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Pethig, F.
 
Towards Industrie 4.0 Compliant Configuration of Condition Monitoring Services [Program→]
 

Petlenkov, E.
 
Model-based Control Design for a District Heating Plant [Program→]
 

Petrali, P.
 
Dynamic Monitoring of Key-Performance Indicators in Industrial Environments [Program→]
 

Pimentel, J.
 
Energy Optimization of an Experimental Wireless Sensor Network for Remote Areas, Part I: Intra-Cluster Communications [Program→]
 

Pinkal, K.
 
A New Approach to Model-Based Test Case Generation for Industrial Automation Systems [Program→]
 

Pinto, L.
 
Safe Dynamic Reconfiguration Through Supervisory Control in IEC 61499 Compliant Systems [Program→]
 

Pirani, M.
 
The Relational Model: in Search for Lean and Mean CPS technology [Program→]
 

Pirehgalin, M.
 
Integration of Safety Aspects in Modelling of Networked Control Systems [Program→]
 

Pires, F.
 
Migration from Traditional towards Cyber-Physical Production Systems [Program→]
 

Plageras, A.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Plosila, J.
 
A Reliable Weighted Feature Selection for Auto Medical Diagnosis [Program→]
 

Pokahr, A.
 
Evolution of Cyber-Physical Production Systems supported by community-enabled experiences [Program→]
 

Pongpisuttinun, N.
 
An Appraisement of Human Happiness Level based on Air Quality through Fuzzy Logic Inference System [Program→]
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Pongyupinpanich, S.
 
An Appraisement of Human Happiness Level based on Air Quality through Fuzzy Logic Inference System [Program→]
 

Pongyupinpanich, S.
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Prageeth, S.
 
Novel Infrastructure with Common API using Docker for Scaling the Degree of Platforms for Smart Community Services [Program→]
 

Prieler, J.
 
Metric based modelling of flexibility properties of demonstration plants [Program→]
 

Pritchard, S.
 
Security in Software-Defined Wireless Sensor Networks: Threats, Challenges and Potential Solutions [Program→]
 

Psannis, K.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Pulvermueller, E.
 
Early Model-Driven Timing Validation of IoT-Compliant Use Cases [Program→]
 

Pérez, F.
 
A novel approach for Flexible Automation Production Systems [Program→]
 

 

Q

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Quan, Y.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Quang, N.
 
Ontology-Based Integration of Performance Related Data and Models: An Application to Industrial Turbine Analytics [Program→]
 

 

R

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Rahimi, N.
 
Efficient Data Lookup in Non-DHT Based Low Diameter Structured P2P Network [Program→]
 
A Modified Version of DVR-Based Multicasting with Security [Program→]
 
An Efficient Approach for Load-Shared and Fault- Tolerant Multicore Shared Tree Multicasting [Program→]
 

Rahimi, S.
 
Efficient Data Lookup in Non-DHT Based Low Diameter Structured P2P Network [Program→]
 
An Efficient Approach for Load-Shared and Fault- Tolerant Multicore Shared Tree Multicasting [Program→]
 

Rahm, J.
 
A roundtrip engineering approach for data consistency in process industry environments [Program→]
 

Rahmati, M.
 
Leakage Detection in a Gas Pipeline Using Artificial Neural Networks Based on Wireless Sensor Network and Internet of Things [Program→]
 
SOC Estimation for a Lithium-Ion Battery by Designing a Nonlinear Observer Based on an Equivalent Circuit Model [Program→]
 

Ramis Ferrer, B.
 
Ensuring the consistency between assembly process planning and machine control software [Program→]
 
Legacy Systems Interactions with the Supply Chain Through the C2NET Cloud-based Platform [Program→]
 
Development of a Mobile Application for the C2NET Supply Chain Cloud-based Platform [Program→]
 
Providing an Access Control layer to Web-Based Applications for the industrial domain [Program→]
 

Ratchev, S.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Rauhoeft, G.
 
A harmonized approach for constructing a robust and efficient technology backbone for agile manufacturing systems [Program→]
 

Rausch, R.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Reis, J.
 
Universal Parser for Wireless Sensor Networks in Industrial Cyber Physical Production Systems [Program→]
 

Rettberg, A.
 
Guidelines for Using MARTE Profile Packages Considering Concerns of Real-Time Embedded Systems [Program→]
 

Reznikov, S.
 
Development of the design and description of the control system of the hand rehabilitation device [Program→]
 

Ribeiro, F.
 
Guidelines for Using MARTE Profile Packages Considering Concerns of Real-Time Embedded Systems [Program→]
 

Ribeiro, L.
 
Summer School on Intelligent Agents in Automation: Experience and Reflections from the Second Edition [Program→]
 

Rob, R.
 
Real Time System for Measuring the Pantograph Vertically Movement [Program→]
 

Romagnolo, S.
 
Real-Time Wireless Extensions of Industrial Ethernet Networks [Program→]
 

Roque, A.
 
Modeling faults in communication protocols based on an aspect-oriented method [Program→]
 

Rose, S.
 
Modelling and Certification for Electric Mobility [Program→]
 

Rosen, R.
 
Co-Simulation Techniques in Assistance Systems for Process Control [Program→]
 

Rosero, C.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Roshchin, M.
 
Ontology-Based Integration of Performance Related Data and Models: An Application to Industrial Turbine Analytics [Program→]
 

Rosinger, M.
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

Rosso, R.
 
Safe Dynamic Reconfiguration Through Supervisory Control in IEC 61499 Compliant Systems [Program→]
 

Roy, R.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Runkler, T.
 
Ontology-Based Integration of Performance Related Data and Models: An Application to Industrial Turbine Analytics [Program→]
 

Rusu-Anghel, S.
 
Real Time System for Measuring the Pantograph Vertically Movement [Program→]
 

Rönnholm, J.
 
Protocol interoperability of OPC UA in Service Oriented Architectures [Program→]
 

 

S

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Saalmann, P.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

Saelens, S.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Sahebi, G.
 
A Reliable Weighted Feature Selection for Auto Medical Diagnosis [Program→]
 

Sahinoglu, Z.
 
Online Data-Driven Battery Voltage Prediction [Program→]
 

Salcic, Z.
 
A Framework for Designing Dynamic and Interoperable Automation and Robotics Systems [Program→]
 
ECoS: Energy Control System for Smart Homes [Program→]
 

San-Um, W.
 
An Appraisement of Human Happiness Level based on Air Quality through Fuzzy Logic Inference System [Program→]
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Sanchez, C.
 
CPPS on Low Cost Devices for Batch Process under IEC-61499 and ISA-88 [Program→]
 

Sandor, H.
 
Optimally Scheduled Interventions in the Presence of Vulnerabilities for Modern Cyber-Physical Systems [Program→]
 
Design, Verification and Implementation of a Lightweight Remote Attestation Protocol for Process Control Systems [Program→]
 

Sardá-Espinosa, A.
 
Current Status of Software Development in Industrial Practice: Key Results of a Large-Scale Questionnaire [Program→]
 

Sarkar, A.
 
Ontology Driven Query Language for NoSQL Databases [Program→]
 

Sarkar, S.
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Sauer, H.
 
Building Scalable Models for Anomaly Detection in Self-Organizing Industrial Systems [Program→]
 
Monitoring Self-Organizing Industrial Systems Using Sub-Trajectory Dictionaries [Program→]
 

Savolainen, R.
 
A framework for runtime verification of industrial process control systems [Program→]
 

Schloegl, F.
 
Co-Simulation Techniques in Assistance Systems for Process Control [Program→]
 

Schlögl, F.
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

Schmidt, A.
 
Explanation-Aware Feature Selection using Symbolic Time Series Abstraction: Approaches and Experiences in a Petro-Chemical Production Context [Program→]
 

Schmidt, M.
 
Wireless Interference Identification with Convolutional Neural Networks [Program→]
 

Schmidt, N.
 
Metric based modelling of flexibility properties of demonstration plants [Program→]
 
Recovery Planning Method as End-of-Life Support for Production Systems [Program→]
 

Schmittner, C.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 

Schneider, M.
 
Addressing security challenges in industrial augmented reality systems [Program→]
 

Scholze, S.
 
Multi-Layered Data Mining Architecture in the Context of Internet of Things [Program→]
 
Context Sensitive Collaborative Product Service System Development Environment [Program→]
 
An Approach for Context Sensitive Product Extensions Services [Program→]
 
A real-world application scenario for a novel collaborative ICT engineering platform [Program→]
 

Schotten, H.
 
Addressing security challenges in industrial augmented reality systems [Program→]
 

Schroeder, G.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

Schulte, J.
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

Schulte, R.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 

Schwarz, M.
 
Scalable Cloud Based Semantic Code Analysis To Support Continuous Integration of Industrial PLC Code [Program→]
 

Schwarzenberger, M.
 
Towards a Methodology for Assisted Knowledge Discovery in Manufacturing [Program→]
 

Schwinn, J.
 
ArChes - Automatic Generation of Component Fault Trees from Continuous Function Charts [Program→]
 

Schwung, A.
 
Self-optimization of energy consumption in complex bulk good processes using reinforcement learning [Program→]
 
An Application of Reinforcement Learning Algorithms to Industrial Multi-Robot Stations for cooperative handling operation [Program→]
 
System reconfiguration of modular production units using a SOA-based control structure [Program→]
 

Schwung, D.
 
Self-optimization of energy consumption in complex bulk good processes using reinforcement learning [Program→]
 
An Application of Reinforcement Learning Algorithms to Industrial Multi-Robot Stations for cooperative handling operation [Program→]
 
System reconfiguration of modular production units using a SOA-based control structure [Program→]
 

Schüller, P.
 
Defining and Validating Similarity Measures for Industrial Alarm Flood Analysis [Program→]
 

Schüller, P.
 
Detection of Regime Switching Points in Non-Stationary Sequences using Stochastic Learning based Weak Estimation Method [Program→]
 
Unsupervised Mode Detection in Cyber-Physical Systems using Variable Order Markov Models [Program→]
 

Schütz, D.
 
Metrics for the Evaluation of Data Quality of Signal Data in Industrial Processes [Program→]
 

Seilonen, I.
 
Towards a Task Allocation Algorithm for Frequency Containment Reserves [Program→]
 

Sen, S.
 
Water Quality Prediction: Multi Objective Genetic Algorithm coupled Artificial Neural Network based approach [Program→]
 

Shalyto, A.
 
CSP-based inference of function block finite-state models from execution traces [Program→]
 
Plant trace generation for formal plant model inference: methods and case study [Program→]
 

Shang, L.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Shorokhov, S.
 
Performance evaluation of the message queue protocols to transfer binary JSON in a distributed CNC system [Program→]
 

Sierla, S.
 
A framework for runtime verification of industrial process control systems [Program→]
 
Towards a Task Allocation Algorithm for Frequency Containment Reserves [Program→]
 
Towards Electric Vehicles Integration to Distributed Energy Resources of Prosumer [Program→]
 

Silea, I.
 
Achieving Interoperability Using Low-Cost Middleware OPC UA Wrapping Structure. Case Study in the Water Industry [Program→]
 

Silva, B.
 
An ultrasonic-based localization system for underground mines [Program→]
 

Silva, R.
 
Universal Parser for Wireless Sensor Networks in Industrial Cyber Physical Production Systems [Program→]
 

Singh, S.
 
Solar Powered High Performance Switched Reluctance Motor for EV applications [Program→]
 

Sinha, K.
 
An Efficient Approach for Load-Shared and Fault- Tolerant Multicore Shared Tree Multicasting [Program→]
 

Skeffington, W.
 
Next-Generation Enterprise Architectures -- Common Vernacular and Evolution Towards Service-Orientation [Program→]
 

Smith, N.
 
Automation, per se, is not Job Elimination: How Artificial Intelligence Forwards Cooperative Human-Machine Coexistence [Program→]
 

Soares, L.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Soares, M.
 
Guidelines for Using MARTE Profile Packages Considering Concerns of Real-Time Embedded Systems [Program→]
 

Solberg, A.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Sollfrank, M.
 
Integration of Safety Aspects in Modelling of Networked Control Systems [Program→]
 

Sonklin, C.
 
A Decrease-and-Conquer Genetic Algorithm for Energy Efficient Virtual Machine Placement in Data Centers [Program→]
 

Sousa, M.
 
Algorithm and Tool for LD to SFC Conversion With State-space Method [Program→]
 

Souza, F.
 
Online Evolving Fuzzy Control Design: An Application to a CSTR Plant [Program→]
 
Semi-supervised Soft Sensor and Feature Ranking Based on Co-Regularised Least Squares Regression Applied to a Polymerization Batch Process [Program→]
 

Steckel, T.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Steffens, C.
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Steinmetz, C.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

Steinmetz, C.
 
Modeling faults in communication protocols based on an aspect-oriented method [Program→]
 

Stergiou, C.
 
Solutions for Inter-connectivity and Security in a Smart Hospital Building [Program→]
 

Stokic, D.
 
Context Sensitive Collaborative Product Service System Development Environment [Program→]
 

Strahilov, A.
 
Multifunctional Use of Functional Mock-up Units for Application in Production Engineering [Program→]
 

Stricker, D.
 
Addressing security challenges in industrial augmented reality systems [Program→]
 

Stöbener, K.
 
An Approach for Context Sensitive Product Extensions Services [Program→]
 

Sun, Y.
 
Adaboost-based algorithm for human action recognition [Program→]
 

Suresh, S.
 
Ontology-Based Integration of Performance Related Data and Models: An Application to Industrial Turbine Analytics [Program→]
 

Sürmeli, B.
 
Unsupervised Mode Detection in Cyber-Physical Systems using Variable Order Markov Models [Program→]
 

Süß, S.
 
Multifunctional Use of Functional Mock-up Units for Application in Production Engineering [Program→]
 

 

T

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Tabassam, N.
 
Class-based Query-Optimization for Minimizing Worst-Case Execution Times of Diagnostic Queries in Embedded Real-Time Systems [Program→]
 

Tagliapietra, A.
 
Real-Time Wireless Extensions of Industrial Ethernet Networks [Program→]
 

Taisch, M.
 
A standard approach to production systems modelling based on Finite State Automata [Program→]
 

Talmongkol, N.
 
An Appraisement of Human Happiness Level based on Air Quality through Fuzzy Logic Inference System [Program→]
 
Sentiment Analysis of Foreign Tourists to Bangkok using Data Mining through Online Social Network [Program→]
 

Tang, M.
 
A Decrease-and-Conquer Genetic Algorithm for Energy Efficient Virtual Machine Placement in Data Centers [Program→]
 

Tanik, M.
 
Energy Efficiency Enhanced Shop Floor Scheduling - Data Model and Flexible Optimization Heuristics [Program→]
 

Tauber, M.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 
Towards Flexible and Secure End-to-End Communication in Industry 4.0 [Program→]
 

Tavola, G.
 
A standard approach to production systems modelling based on Finite State Automata [Program→]
 

Tenhunen, H.
 
A Reliable Weighted Feature Selection for Auto Medical Diagnosis [Program→]
 

Tepljakov, A.
 
Model-based Control Design for a District Heating Plant [Program→]
 

Terrazas, G.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Thankachan, J.
 
Solar Powered High Performance Switched Reluctance Motor for EV applications [Program→]
 

Theissler, A.
 
Multi-class Novelty Detection in Diagnostic Trouble Codes from Repair Shops [Program→]
 

Thiede, S.
 
Introducing agent-based simulation of manufacturing systems to industrial discrete-event simulation tools [Program→]
 

Thimm, H.
 
Energy Efficiency Enhanced Shop Floor Scheduling - Data Model and Flexible Optimization Heuristics [Program→]
 

Thron, M.
 
Towards Trustworthy End-to-End Communication in Industry 4.0 [Program→]
 

Tian, Y.
 
A Decrease-and-Conquer Genetic Algorithm for Energy Efficient Virtual Machine Placement in Data Centers [Program→]
 

Tincopa, J.
 
Energy Optimization of an Experimental Wireless Sensor Network for Remote Areas, Part I: Intra-Cluster Communications [Program→]
 

Torsten, K.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Tramarin, F.
 
Real-Time Wireless Extensions of Industrial Ethernet Networks [Program→]
 

Tsang, C.
 
Semantic-aware Anomaly Detection in Real Time Parking Data [Program→]
 

Tsang, K.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Tse, C.
 
Holiday Effecton User Growth Profile and Analysis of Sales Ratein Short Time Scale [Program→]
 

Tshehla, K.
 
State estimation in water distribution network: A review [Program→]
 

Tümer, B.
 
Detection of Regime Switching Points in Non-Stationary Sequences using Stochastic Learning based Weak Estimation Method [Program→]
 
Unsupervised Mode Detection in Cyber-Physical Systems using Variable Order Markov Models [Program→]
 

 

U

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Ulbrich, M.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 

Ulewicz, S.
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 

Ulewicz, S.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 

Ulyantsev, V.
 
CSP-based inference of function block finite-state models from execution traces [Program→]
 
Plant trace generation for formal plant model inference: methods and case study [Program→]
 

Urbas, L.
 
Model-based Engineering of CPPS in the process industries [Program→]
 
A roundtrip engineering approach for data consistency in process industry environments [Program→]
 

Uslar, M.
 
New Control Functions for IEC 61850 [Program→]
 
Simulation: A Case for Interoperability based on LCIM [Program→]
 

 

V

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Vallhagen, J.
 
Agent-based Reconfiguration in a Micro-flow Production Cell [Program→]
 

Van Lierde, H.
 
Incorporating Word Embeddings in the Hierarchical Dirichlet Process for Query-Oriented Text Summarization [Program→]
 

Vansovits, V.
 
Model-based Control Design for a District Heating Plant [Program→]
 

Vargas Martinez, C.
 
A tiered security analysis of Industrial Control System Devices [Program→]
 

Vassiljeva, K.
 
Model-based Control Design for a District Heating Plant [Program→]
 

Vathoopan, M.
 
Modeling and verifying behavioral constraints for automation systems [Program→]
 

Veichtlbauer, A.
 
OPC UA Integration for Field Devices [Program→]
 

Verzano, N.
 
Experiences in Integrating Internet of Things and Cloud Services with the Robot Operating System [Program→]
 

Vithana, D.
 
Placing Reflectors for Reducing Payback Period of Solar PV for Smart Buildings [Program→]
 

Vitturi, S.
 
Real-Time Wireless Extensions of Industrial Ethernet Networks [Program→]
 

Vogel, M.
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 

Vogel-Heuser, B.
 
Metric based modelling of flexibility properties of demonstration plants [Program→]
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 
Current Status of Software Development in Industrial Practice: Key Results of a Large-Scale Questionnaire [Program→]
 

Vogel-Heuser, B.
 
A tiered security analysis of Industrial Control System Devices [Program→]
 
A Virtual Training System for Aging Employees in Machine Operation [Program→]
 
Improvement of Maintenance through Speech Interaction in Cyber-Physical Production Systems [Program→]
 
Integration of Safety Aspects in Modelling of Networked Control Systems [Program→]
 
Summer School on Intelligent Agents in Automation: Experience and Reflections from the Second Edition [Program→]
 
Scalable Cloud Based Semantic Code Analysis To Support Continuous Integration of Industrial PLC Code [Program→]
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 
Data-driven Model Development for Quality Pediction in Forming Technology [Program→]
 
Metrics for the Evaluation of Data Quality of Signal Data in Industrial Processes [Program→]
 
Classification of Agent-based Approaches to Apply Cyber Physical Systems in Manufacturing [Program→]
 

Voinov, A.
 
Automatic Generation of Function Block Systems Implementing HMI for Energy Distribution Automation [Program→]
 

Voos, H.
 
Cooperative Localization of Unmanned Aerial Vehicles in ROS - The Atlas Node [Program→]
 

Vostropyatov, A.
 
Method of automated design of operating the workpieces in a CAD system environment. [Program→]
 

Vyatkin, V.
 
A framework for runtime verification of industrial process control systems [Program→]
 
Towards a Task Allocation Algorithm for Frequency Containment Reserves [Program→]
 

Vyatkin, V.
 
On Requirements-driven Design of Distributed Smart Grid Automation Control [Program→]
 
Automatic Generation of Function Block Systems Implementing HMI for Energy Distribution Automation [Program→]
 
Service-Oriented Data Acquisition and Management for Industrial Cyber-Physical Systems [Program→]
 
Towards Electric Vehicles Integration to Distributed Energy Resources of Prosumer [Program→]
 
CSP-based inference of function block finite-state models from execution traces [Program→]
 
Automatic Generation of Function Block Applications Using Evolutionary Algorithms: Initial Explorations [Program→]
 

van Deventer, J.
 
Protocol interoperability of OPC UA in Service Oriented Architectures [Program→]
 

 

W

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Wada, T.
 
Online Data-Driven Battery Voltage Prediction [Program→]
 

Wagner, C.
 
Ontology-driven IoT code generation for FIWARE [Program→]
 

Walter, A.
 
Towards Industrie 4.0 Compliant Configuration of Condition Monitoring Services [Program→]
 

Wang, E.
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Wang, K.
 
A Framework for Designing Dynamic and Interoperable Automation and Robotics Systems [Program→]
 

Wang, P.
 
Service-Oriented Data Acquisition and Management for Industrial Cyber-Physical Systems [Program→]
 
Ontology-Based Web Service Integration for Flexible Manufacturing Systems [Program→]
 

Wang, S.
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Wang, W.
 
Semantic-aware Anomaly Detection in Real Time Parking Data [Program→]
 

Wang, W.
 
AutoEncoder based High-dimensional Data Fault Detection System [Program→]
 
Multi-Label Classification for images with Missing Labels [Program→]
 

Wang, X.
 
An Autopilot System Based on ROS Distributed Architecture and Deep Learning [Program→]
 

Wang, Y.
 
Online Data-Driven Battery Voltage Prediction [Program→]
 

Wang, Z.
 
Segmentation of the Left Ventricle by Slope Difference Distribution Based on Threshold Selection [Program→]
 
Evaluation of State of the Art Segmentation Methods for Muscle Cells [Program→]
 

Warkentin, H.
 
Grid-Based Outlier Detection in Large Data Sets for Combine Harvesters [Program→]
 

Wassermann, E.
 
Interoperability rules for heterogenous Multi-Agent Systems Levels of conceptual interoperability model applied for multi-agent systems [Program→]
 

Wassilew, S.
 
Model-based Engineering of CPPS in the process industries [Program→]
 

Wehrstedt, J.
 
Co-Simulation Techniques in Assistance Systems for Process Control [Program→]
 

Weigl, A.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 
Generation of Monitoring Functions in Production Automation Using Test Specifications [Program→]
 

Weinelt, D.
 
Towards a Big Data Platform for Managing Machine Generated Data in the Cloud [Program→]
 

Weis, .
 
Automated Seam Tracking System based on Passive Monocular Vision for Automated Linear Robotic Welding Process [Program→]
 

Wen, A.
 
Analysis and Machine-Learning based Detection of Outlier Measurements of Ultra-WideBand in an Obstructed Environment [Program→]
 

Wen, Y.
 
Simulative Evaluation of Applying Optimized Support Vector Machines to Identify the Simplified Ship Dynamic Model [Program→]
 

Wermann, J.
 
Validation of PERFoRM reference architecture demonstrating an automatic robot reconfiguration application [Program→]
 
Specification and Design of an Industrial Manufacturing Middleware [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Werner, M.
 
Building Scalable Models for Anomaly Detection in Self-Organizing Industrial Systems [Program→]
 

Wickramathilaka, S.
 
Placing Reflectors for Reducing Payback Period of Solar PV for Smart Buildings [Program→]
 

Wiebe, F.
 
Generalized Test Tables: A Powerful and Intuitive Specification Language for Reactive Systems [Program→]
 

Wieghardt, J.
 
Building Scalable Models for Anomaly Detection in Self-Organizing Industrial Systems [Program→]
 
Monitoring Self-Organizing Industrial Systems Using Sub-Trajectory Dictionaries [Program→]
 

Wiemer, H.
 
Towards a Methodology for Assisted Knowledge Discovery in Manufacturing [Program→]
 

Wijekoon, J.
 
Novel Infrastructure with Common API using Docker for Scaling the Degree of Platforms for Smart Community Services [Program→]
 

Wijesinghe, L.
 
Placing Reflectors for Reducing Payback Period of Solar PV for Smart Buildings [Program→]
 

Wijesuriya, P.
 
Placing Reflectors for Reducing Payback Period of Solar PV for Smart Buildings [Program→]
 

Wings, E.
 
Developing Open Source Cyber-Physical Systems for Service-Oriented Architectures Using OPC UA [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Wixted, A.
 
Empirical Propagation Performance Evaluation of LoRa for Indoor Environment [Program→]
 

Wu, C.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

 

X

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Xiong, J.
 
Segmentation of the Left Ventricle by Slope Difference Distribution Based on Threshold Selection [Program→]
 

Xue, L.
 
Ontology-Based Web Service Integration for Flexible Manufacturing Systems [Program→]
 

 

Y

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Yablochnikov, E.
 
Method of automated design of operating the workpieces in a CAD system environment. [Program→]
 

Yang, C.
 
On Requirements-driven Design of Distributed Smart Grid Automation Control [Program→]
 
Automatic Generation of Function Block Systems Implementing HMI for Energy Distribution Automation [Program→]
 

Yang, D.
 
An Exponential Triangle Model for the Facebook Network Based on Big Data [Program→]
 

Yang, Y.
 
Segmentation of the Left Ventricle by Slope Difference Distribution Based on Threshold Selection [Program→]
 
Evaluation of State of the Art Segmentation Methods for Muscle Cells [Program→]
 

Yarza, I.
 
A Railway Safety and Security Concept for low-power mixed-criticality systems [Program→]
 

Yazdizadeh, A.
 
SOC Estimation for a Lithium-Ion Battery by Designing a Nonlinear Observer Based on an Equivalent Circuit Model [Program→]
 

Yazdizadeh, A.
 
Leakage Detection in a Gas Pipeline Using Artificial Neural Networks Based on Wireless Sensor Network and Internet of Things [Program→]
 

Yazdizadeh, H.
 
Leakage Detection in a Gas Pipeline Using Artificial Neural Networks Based on Wireless Sensor Network and Internet of Things [Program→]
 

Yu, H.
 
Ontology-Based Web Service Integration for Flexible Manufacturing Systems [Program→]
 

 

Z

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]

Zarte, M.
 
Concept for Introducing the Vision of Industry 4.0 in a Simulation Game for Non-IT Students [Program→]
 
Methodology and Case Study for Investigating Curricula of Study Programs in Regard to Teaching Industry 4.0 [Program→]
 

Zeller, M.
 
ArChes - Automatic Generation of Component Fault Trees from Continuous Function Charts [Program→]
 

Zeng, P.
 
Ontology-Based Web Service Integration for Flexible Manufacturing Systems [Program→]
 

Zerrouki, N.
 
Adaboost-based algorithm for human action recognition [Program→]
 

Zhan, C.
 
Holiday Effecton User Growth Profile and Analysis of Sales Ratein Short Time Scale [Program→]
 
Detrended Fluctuation Analysis of Daily Rainfall Records of the Entire China [Program→]
 

Zhang, A.
 
Robust Fault Tolerant Control for Drive Train in Wind Turbine Systems with Stochastic Perturbations [Program→]
 

Zhang, D.
 
Reinforcement-Learning Based Fault-Tolerant Control [Program→]
 

Zhang, H.
 
AutoEncoder based High-dimensional Data Fault Detection System [Program→]
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Zhang, Y.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Zhang, Y.
 
An Exponential Triangle Model for the Facebook Network Based on Big Data [Program→]
 

Zhang, Y.
 
Recommending e-Books by Multi-layer Clustering and Locality Reconstruction [Program→]
 

Zhang, Z.
 
Service-Oriented Data Acquisition and Management for Industrial Cyber-Physical Systems [Program→]
 

Zhao, M.
 
Semi-supervised Classification for Rolling Fault Diagnosis via Robust Sparse and Low-rank Model [Program→]
 
Graph based Semi-supervised Classification via Capped l2,1-Norm Regularized Dictionary Learning [Program→]
 

Zhao, Y.
 
Hierarchical Context-Aware Anomaly Diagnosis in Large-Scale PV Systems Using SCADA Data [Program→]
 

Zhu, H.
 
A Time-synchronized ZigBee Building Network for Smart Water Management [Program→]
 

Zhu, M.
 
Simulative Evaluation of Applying Optimized Support Vector Machines to Identify the Simplified Ship Dynamic Model [Program→]
 

Zoitl, A.
 
Modeling and verifying behavioral constraints for automation systems [Program→]
 

Zöller, M.
 
Framework for Mining Event Correlations and Time Lags in Large Event Sequences [Program→]
 

[top ↑] [A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z] [bottom ↓]